This is a prop I made for a show called "The Storm" It took a while, but I thoroughly enjoyed all the detailed work. Here's how I did it:
I began by researching different designs for the cigar box. I settled on an earlier design as the brand “Robt. Burns” was clearly displayed on the front and easy for audiences to read.
I then began to take measurements for the box. I decided to make mine a little smaller than the original so it would fit between other props on set. I drew a blueprint and then cut out the design using 6mm plywood.
After Cutting I assembled the box using a combination of wood glue and super glue for optimal strength. For the lid I used gaffer tape so it could be opened and closed easily.
I then covered the inside of the box with canvas to give the box a luxurious feel.
For the outside of the box I needed the signature “Robt Burns” tape to decorate the sides of the box. For this I found an image of the tape and using Photoshop cut out a section of the tape from the image and then patched it together to create a line of tape. I then printed this out on canvas paper and lined the box with the tape.
I then needed to create the label for the inside of the lid. Unfortunately all the pictures of the labels I found appeared too pixelated when printed to a larger scale. To Remedy this I used photoshop to create the text that I needed for the label and patched together various images to create my replica version of the label.
Adding Text to Picture of Robt. Burns:
Creating Circular emblem..
After gluing the label to the inside of the lid I then began work on the top of the box.
As shown earlier I wanted this design for the top:
To achieve this effect I used some fablon vinyl that I had leftover from another project. I used oak and pine for the two shades of wood needed. I cut the pieces individually so they wouldn't sit on top of each other.
The next step was to add the golden Robt. Burns writing. For this I printed out the logo and traced the letters onto the box using carbon paper.
I then painted over the outline with golden paint.
The last step was to apply the golden edging around the lid. I used some chain link line stickers for this effect.
And it's done! Here are some extra pictures: